Remote Control Unit
Sensor
Display
NIGHT SETBACK button
1 HR. TIMER button
MODE selector button
FLAP button
ADDRESS switch
Transmitter
(Cover closed)
ON/OFF operation button
Temperature setting buttons
FAN SPEED selector button
TIMER SELECT button
TIMER AND PRESENT TIME setting buttons
PROGRAM button
ACL button
SENSOR button
Battery compartment
(Pull off the cover to expose the batteries.)
NOTE
The illustration above pictures the remote control unit after the cover has been lowered and removed.
Transmitter | When you press the buttons on the remote control unit, the | mark | |
| appears in the display to transmit the setting changes to the receiver in | ||
| the air conditioner. |
| |
Sensor | A temperature sensor inside the remote control unit senses the room | ||
| temperature. |
|
|
|
| ||
Display | Information on the operating conditions is displayed while the remote control | ||
| unit is switched on. If the unit is turned off, only the mode that was set | ||
| previously is still displayed. |
| |
|
| ||
NIGHT SETBACK button | For details, see “Night Setback Mode”. When you press this button in the | ||
| DRY, COOL or HEAT mode, the mark appears in the display, and the remote | ||
| control unit automatically adjusts the set temperature to save energy. | ||
|
|
|
|
Temperature setting | Press the | button to increase the set temperature. |
|
buttons (TEMP.) | Press the | button to reduce the set temperature. |
|
ON/OFF operation button | This button is for turning the air conditioner on and off. |
| |
|
|
| |
Timer and Present Time | First, press the program button to select the mode you want. |
| |
setting buttons | Each time you press the “HH” button, the hours advance by one. |
| |
| Each time you press the “MM” button, the minutes advance by one. | ||
8 |
