Remote Control Unit (Display)
Displayed when main unit sensor is in use
“ROOM TEMP” is displayed when the temperature setting has not been made.
“TEMP” is displayed when setting temperature.
Displayed when transmitting data
Displayed when temperature is shown
Displayed when the temperature setting is at the upper or lower allowable limit
Displayed when setting timer
Symbols
(1)Operation mode
AUTO.......................................
HEAT........................................
MILD DRY................................
COOL .......................................
(2)Fan speed
AUTO.......................................
HIGH ........................................
MEDIUM..................................
LOW.........................................
(3)Temperature setting 60 – 86 °F
When set to 82 °F ...........
Current temperature indication .........................
(4)Timer
(5)NIGHT SETBACK ....................
(6)Confirmation of transmission ...........................
(7)Flap
Angle indication .....................
Sweep indication....................
ON
OFF
1HR.
7 |
