CAUTIONS FOR USAGE
Model with CE mark
This unit is equipped with a circuit breaker on the back. Make sure this breaker is switched ON before the unit starts to run.
When the operation of the unit is stopped by this breaker, contact with dealer or service station after disconnected the power supply plug.
Circuit breaker
ENVIRONMENTAL CONDITIONS
This equipment is designed to be safe at least under the following conditions (based on the IEC
1.Indoor use;
2.Altitude up to 2000 m;
3.Ambient temperature 5oC to 40oC
4.Maximum relative humidity 80% for temperature up to 31oC decreasing linearly to 50% relative humidity at 40oC;
5.Mains supply voltage fluctuations not to exceed ±10% of the nominal voltage;
6.Other supply voltage fluctuations as stated by the manufacturer;
7.Transient overvoltages according to Installation Categories (Overvoltage Categories) II; For mains supply the minimum and normal category is II;
8.Pollution degree 2 in accordance with IEC 664.
7