Sanyo PDG-DHT8000L owner manual If the Filter counter reached a time set in the timer

Appendix

The projector is detecting abnormal condition..

			Indicators							Projector Condition
POWER	LAMP	WARNING		WARNING		SHUTTER		LAMP 1/2
green	red		TEMP.		FILTER		blue		REP.
			red		orange				orange
	✽						✽		✽	If the Filter counter reached a time set in the timer
										setting, a Filter replacement icon (Fig.2) appears
										on the screen and the WARNING FILTER indicator
										on the top panel lights up. Replace the filter as
										soon as possible. If the filter is out of scroll and the
										projector reaches a time set in the timer setting, Fig.
Fig.2 Filter replacement icon										3 appears on the screen and the WARNING FILTER
										indicator lights up. Replace the filter cartridge as
										soon as possible.
										If the filter is clogged and no scroll is left in the filter
Fig.3										cartridge, a Filter cartridge replacement icon (Fig.4)
										appears on the screen and the WARNING FILTER
										indicator lights up. Replace the filter cartridge as
										soon as possible.
Fig..4 Filter cartridge replacement icon										✔Note:
										•Fig.2, Fig.3 and Fig.4 icon will not appear when
										the Display function is set to “Off” (p.49), or during
										“Freeze” (p.30).
							✽		✽	The projector detects an abnormal condition during
										filter scroll.
✽							✽		✽	The projector is being cooled down after detecting
										an abnormal condition during filter scroll.
										The projector has been cooled down enough and is
							✽		✽	in the stand-by mode after detecting an abnormal
										condition during filter scroll.
	✽		✽				✽		✽	The filter cartridge is removed while the projector is
										on.
										The projector is turned on without installing the filter
										cartridge, and then the filter cartridge is installed
										while the projector is on.
										The projector detects an abnormal condition and
										cannot be turned on. Unplug the AC power cord and
										plug it again to turn on the projector. If the projector
										is turned off again, unplug the AC power cord and
										contact the dealer or the service center. Do not
										leave the projector on. It may cause an electric
										shock or a fire hazard.
✽	✽		✽		✽				✽	The shutter is out of control.
									✽	The shutter is out of control. (The projector is in the
										cooling mode.)
					✽				✽	The shutter is out of control. (The projector is in the
										stand-by mode.) In that case, contact the service
										center immediately.

81