BEFORE OPERATION
D.ZOOM BUTTON
Used to select the DIGITAL ZOOM +/– mode and resize the image. (p.30)
SELECT BUTTON
Used to execute the selected item, or expand/ compress the image in the DIGITAL ZOOM +/- mode. (p.30)
MENU BUTTON
Used to select the MENU
Operation. (pp.18, 19)
Used to operate the P-
TIMER function. (p.23)
ZOOM BUTTON
Used to adjust zoom. (p.22)
COLOR MANAGEMENT
BUTTON
Used to operate the Color management function.
NO SHOW BUTTON
Used to turn the picture into a black image. (p.23)
FREEZE BUTTON
Used to freeze the picture. (p.23)
POINT (VOLUME +/-)
BUTTONS
Used to select an item or adjust a value in
The POINT LEFT/ RIGHT buttons are also used as VOLUME +/- buttons. (p.23)
INPUT 1 BUTTON
Used to select an input source (INPUT 1). (p.24)
INPUT 2 BUTTON
Used to select an input source (INPUT 2).
(pp.25, 31)
INPUT 3 BUTTON
Used to select an input source (INPUT 3). (p.31)
NETWORK BUTTON
Used to select a network input (optional).
Operating Range
Point the remote control toward the projector (a Receiver Window) when pressing any button. Maximum operating range for the remote control is about 16.4’ (5 m) and 60° in front and rear of the projector.
60°
16.4’ (5 m)
16.4’ (5 m)
60°
REMOTE CONTROL BATTERIES INSTALLATION
1 | Open the battery |
compartment lid. |
Press the lid downward and slide it.
2 | Install new batteries into | 3 | Replace the compartment lid. |
the compartment. |
|
Two AA size batteries
For correct polarity (+ and
To insure safe operation, please observe following precautions:
●Use two (2) AA or LR6 type alkaline batteries.
●Always replace batteries in sets.
●Do not use a new battery with an used battery.
●Avoid contact with water or liquid.
●Do not expose the remote control to moisture, or heat.
●Do not drop the remote control.
●If a battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
●Danger of explosion if battery is incorrectly replaced.
●Dispose of used batteries according to batteries manufacturers instructions and local rules.
16
