PREPARATION
NAME OF EACH PART OF PROJECTOR
FRONT OF CABINET |
| SPEAKERS |
|
|
|
PROJECTION LENS ✽
✽optional
CAUTION
Do not turn on the projector with the lens cap attached. High temperature from light beam may damage the lens cap and result in fire hazard.
TOP CONTROLS
AND INDICATORS
Kensington Security Slot
This slot is for a Kensington lock used to deter theft of the projector.
* Kensington is a registered trademark of ACCO Brands Corporation.
AIR INTAKE
VENT
INFRARED
REMOTE RECEIVER
| BACK OF CABINET |
|
|
|
|
|
| |
|
| POWER CORD |
| TERMINALS |
| INFRARED | ||
|
|
|
| CONNECTOR |
| AND CONNECTORS |
| REMOTE RECEIVER |
| EXHAUST VENT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HOT AIR EXHAUSTED !
Air blown from the exhaust vent is hot. When using or installing the projector, the following precautions should be taken.
●Do not put a flammable object near this vent.
●Keep the rear grills at least 3.3’ (1 m) away from any object, especially from heat- sensitive objects.
●Do not touch this area, especially screws and metallic parts. This area will become hot when the projector is in use.
This projector detects internal temperature and automatically controls operating power of the cooling fans.
BOTTOM OF CABINET
CARRYING
HANDLE
LAMP COVER
When attaching the
AIR INTAKE VENTS
This projector is equipped with cooling fans for protecting from overheating. Pay attention to the following matters to ensure proper ventilation and avoid a possible risk of fire and malfunction.
●Do not cover the vent slots.
●Keep this side clear of any objects. Obstructions may block cooling the air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7
