BASIC OPERATION
TURNING ON / OFF PROJECTOR
TURNING ON THE PROJECTOR
1 | Complete peripheral connections (with a computer, VCR, etc.) |
| before turning on the projector. |
2 | Connect the projector’s AC power cord into an AC outlet. The |
| LAMP indicator lights RED, and the READY indicator lights |
| GREEN. |
3 | Press the POWER |
| the remote control. The LAMP indicator dims, and the cooling |
| fans start to operate. The preparation display appears on the |
| screen and the countdown starts. |
4 | After the countdown, the input source that was selected the |
| last time and the Lamp control status icon (see page 41) |
appear on the screen.
If the projector is locked with a PIN code, a PIN code Input Dialog Box appears. Enter a PIN code as instructed below.
To Enter a PIN code
Select a number by pressing the POINT LEFT/RIGHT button and fix the number with the SELECT button. The number changes to “✳.” If you fixed a wrong number, move the pointer to “Set” or “Clear” once by pressing the POINT DOWN button, then return to “PIN code.” Enter the correct number.
Repeat this step to complete entering a
When the
If you entered a wrong PIN code, “PIN code” and the number (✳✳✳✳) turn red and disappear. Enter a PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector. Setting a PIN code prevents unauthorized use of the projector.
A PIN code consists of a
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer be started. Take special care in setting a new PIN code; write down the number in a column on page 60 of this manual and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service center.
16
The preparation display disappears after 30 seconds.
Selected Input Source and Lamp control
Lamp control status
PIN code Input Dialog Box
Pointer
After the OK icon disappears, you can operate the projector.
20
