APPENDIX
When a input signal is digital from DVI terminal, refer to the chart below.
✳
RESOLUTION | |||
DISPLAY |
| (kHz) | (Hz) |
640 x 480 | 31.47 | 59.94 | ||
| 720 x 480 | 31.47 | 59.88 | |
| (Progressive) | |||
768 x 575 | 31.25 | 50.00 | ||
(Progressive) | ||||
| 800 x 600 | 37.879 | 60.32 | |
| 1024 x 768 | 43.363 | 60.00 | |
| 1366 x 768 | 48.36 | 60.00 | |
| 1360 x 768 | 47.70 | 60.00 | |
| 1376 x 768 | 48.36 | 60.00 | |
| 1368 x 768 | 46.50 | 50.00 | |
| 1280 x 1024 | 63.98 | 60.02 | |
RESOLUTION | |||
DISPLAY |
| (kHz) | (Hz) |
✳ | 1280 x 1024 | 60.276 | 58.069 |
✳ | 1400 x 1050 | 63.97 | 60.19 |
1280 x 720 | 45.00 | 60.00 | |
(Progressive) | |||
1280 x 720 | 37.50 | 50.00 | |
(Progressive) | |||
1920 x 1035 | 33.75 | 60.00 | |
(Interlace) | |||
1920 x 1080 | 33.75 | 60.00 | |
(Interlace) | |||
1920 x 1080 | 28.125 | 50.00 | |
(Interlace) | |||
1920 x 1080 | 33.75 | 60.00 | |
1920 x 1080 | 28.125 | 50.00 | |
1920 x 1080 | 27.00 | 48.00 |
✳Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed.
NOTE: Specifications are subject to change without notice.
INDICATORS AND PROJECTOR CONDITION
Check the indicators for projector condition.
| Indicators |
|
| |
|
|
|
| Projector Condition |
LAMP | WARNING | READY | LAMP | |
REPLACE | TEMP. | green | red |
|
yellow | red |
| ||
|
|
| ||
|
|
|
|
|
|
|
|
| The projector is OFF. (The AC power cord is unplugged.) |
|
|
|
|
|
✽ |
|
|
| The projector is ready to be turned on with the POWER ON- |
|
|
| OFF button. | |
|
|
|
| |
|
|
|
|
|
✽ |
|
|
| The projector is operating normally. |
|
|
|
|
|
|
|
|
| The Warning Temp. indicator blinks red to let you know the |
|
|
|
| internal temperature of the projector exceeds a normal level. If |
|
|
|
| the temperature goes up further, the projector will be turned |
✽ |
|
|
| off automatically and the Ready indicator goes out. When the |
|
|
| projector is cooled down enough and the temperature returns | |
|
|
|
| |
|
|
|
| to normal, the READY indicator lights green and the projector |
|
|
|
| can be turned on again. (The WARNING TEMP. indicator |
|
|
|
| keeps blinking.) Check and clean the air filters. |
|
|
|
|
|
|
|
|
| The projector is cooled down enough and the temperature |
✽ |
|
|
| returns to normal. When turning on the projector, the |
|
|
| WARNING TEMP. indicator stops blinking. Check and clean | |
|
|
|
| |
|
|
|
| the air filters. |
|
|
|
|
|
• • • on | • • • blinking | • • • dim | • • • off | |
55
