Sanyo PLC-WL2503A Appendix, The image is distorted or runs off, PIN code dialog box appears

	Appendix
The image is distorted or runs off.	– Check PC adjustment Menu or Screen and adjust them.
	See pages 31-32, 35-36.
PIN code dialog box appears	– PIN code lock is being set. Enter a PIN code (the “1234” or numbers
at start-up..	you have set). See pages 19, 55-56.
The Remote Control does	– Check the batteries.
not work..	– Make sure no obstruction is between the projector and remote
	control.
	– Make sure you are not too far from the projector when using the
	remote control. Maximum operating range is 16.4'(5 m).
	– Make sure the code of the remote control is conformed to the
	projector’s code. See page 54.
	– Unlock the Key lock function for the remote control function.
	See page 55.
Indicator blinks or lights.	– Check the status of the projector with referring to "Indicators and
	projector Condition". See page 70.
The exclamation mark appears	– Your operation is invalid. Operate correctly.
on the screen..

Top control does not work..

–The top control is not available if the top control is locked at Key lock under Security of Setting section. See page 55.

Unable to unlock the Logo PIN code lock or Security PIN code lock..

–Contact the dealer where you purchased the projector or the service center.

WARNING :

High voltages are used to operate this projector.. Do not attempt to open the cabinet..

If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

The CE Mark is a Directive conformity mark of the European Community (EC).

Licensed under USP5,717,422

Pixelworks ICs used.

This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.

67