Sanyo PLC-WL2503A owner manual Computer Input Auto PC adjustment, Menu Operation, Note

Computer Input

Auto PC adjustment

Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal , Vertical position to conform to your computer.

Menu Operation

Auto PC adj..

PC adjust Menu

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select PC adjust
	and then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Auto PC adj.. and
	then press the SELECT button.

To store adjustment parameters

The adjusted parameters from the Auto PC adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1-10)in the PC System Menu (see page 29). See also “Store” on page 32.

Note:

•Fine sync, Total dots, Horizontal and Vertical position of some computers can not be fully adjusted with the Auto PC adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.31-32).

•The Auto PC adjustment can not be operated when

480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p.29) , or when the signal is coming from the HDMI terminal.

Use Point ▲▼ buttons to select Auto PC adj.. and press the SELECT button. Please wait.... . appears while the Auto PC

adjustment is in process.

30