Manuals / Sanyo / Computer Equipment / Projector

Sanyo PLC-WL2503A Video Input Video System Selection, Video or S-video, Component, Auto, Note

Models: PLC-WL2503A

1 78
Download 78 pages 35.77 Kb
Page 39
Image 39
Video Input

Video Input

Video System Selection

1

Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select Input and

 

then press the Point ► or the SELECT button.

2

Use the Point ▲▼ buttons to select Video or S-video

or Computer 1(Component) and then press the

 

SELECT button.

3

Use the Point ▲▼ buttons to select System and then

press the Point ► or the SELECT button. Use the

Point ▲▼ buttons to select the desired system and then press the SELECT button.

AV System Menu (Video or S-video)

Video or S-video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-Mor PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4..43/PAL-M/PAL-N

If the projector can not reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4..43, PAL-M, and PAL-N.

Component

Auto

AV System Menu (Component)

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector can not reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i.

Note:

The AV System Menu can not be selected when selecting RGB (Scart) or HDMI.

39

Page 38 Page 40
Page 39
Image 39
Sanyo PLC-WL2503A Video Input Video System Selection, Video or S-video, Auto, Component Video Signal Format, Note
Page 38 Page 40