Sanyo PLC-WL2503A owner manual Computer Input, Reset, Mode free, Store, Note

Computer Input

Reset

To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.

Mode free

To clear the stored data, select Mode free and then press the Point ► or the SELECT button. Move the highlight to the Mode that you want to clear and then press the SELECT button.

Store

To store the adjusted data, select Store and then press the Point ► or the SELECT button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the SELECT button.

Note:

•Display area (H/V) can not be selected when 480i,

575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.29).

•When input computer signal to the projector, PC adjust will become available.

Mode free Menu

This Mode has stored parameters.

Values of Total dots, Horizontal,

Vertical, Display area H, and

Display area V.

Store Menu Vacant

Press MENU button	Press SELECT button to
to close this dialog	store adjusted data.
box.

32