Sanyo PLC-WL2503A Installation Connecting to a Computer, Cables used for connection, Note

Installation

Connecting to a Computer

Cables used for connection

•VGA cables (Mini D-sub 15 pin) *

•Audio cables

•HDMI-DVI cable

(*One cable is supplied; other cables are not supplied with the projector.)

DVI	Monitor Output						External Audio Equipment
		or	Monitor		Audio Output	Audio Input
Output
	Monitor Input			Output

HDMI-DVI cable

VGA cable

VGA cable

Audio cable	Audio cable
(stereo)	(stereo)

COMPUTER IN 1 / COMPUTER IN 2 / COMPUTER/ AUDIO OUT HDMI COMPONENT IN MONITOR OUT COMPONENT (stereo)

This terminal is switchable. Set up the terminal as COMPUTER IN 2 or

MONITOR OUT. (P. 50)

AUDIO IN

Note:

•Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when using the COMPUTER IN 1/COMPONENT IN terminal as input.

•When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1/COMPONENT IN and not the

COMPUTER IN 2 /MONITOR OUT.

•Analog RGB and component signals can be output from the COMPUTER IN 2/MONITOR OUT terminal when using the COMPUTER IN 2/MONITOR OUT terminal as output.

Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.

14