Sanyo PLC-WL2503A Basic Operation Focus Adjustment, Auto Setup Function, Keystone Correction

Basic Operation

Focus Adjustment

Adjust the lens focus with the focus lever.
	Focus Lever

Auto Setup Function

Auto setup function is provided to automatically execute the setting of Auto setup (includes Input search and Auto PC adj. functions) in the Setting Menu by just pressing the AUTO SET button on the remote control. Refer to page 45 for the setting of the Auto setup function.

Note:

Fine sync, Total dots, Horizontal and Vertical position of some computers can not be fully adjusted with the Auto PC adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (pp.31-32)

Remote Control

HDMI

AUTO SET button

Keystone Correction

Press the KEYSTONE button on the remote control or on
the top control. The Keystone dialog box appears. Use
the Point ▲▼ buttons to correct keystone distortion. The		Remote Control
keystone adjustment can be stored (see page 46).
Reduce the upper width	Reduce the lower width
with the Point ▲ button.	with the Point ▼ button.	POINT ▲▼ buttons

KEYSTONE button

•The white arrows indicate that there is no correction.

•A red arrow indicates the direction of correction.

•An arrow disappears at the maximum correction.

•If you press the KEYSTONE button on the remote control or on the top control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled.

•The adjustable range is limited depending on the input signal.

Top Control

POINT ▲▼ buttons KEYSTONE button

23