Sanyo PLC-WL2503A Setting, Ceiling, Rear, Screen aspect, HDMI setup, Image, Sound, Terminal

Setting

Ceiling

When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Screen aspect

This function is used to project the image to a 4:3 or 16:9 projection screen.

4:3 ..... Set to a 4:3 projection screen.

16:9 ..... Set to a 16:9 projection screen.

16:10 ....16:10 is the aspect of the LCD panel. The original

Screen Menu is available.

HDMI setup

This function is only used for HDMI input source.

Image

Select Normal or Enhanced to match the video range setting of your HDMI Digital RGB equipment.

Sound

HDMI: When using the HDMI cable, select HDMI. Both video and audio are transferred and you need not to connect any additional cables for audio.

Computer : When using the DVI-HDMI cable, select Computer and connect the audio cable to

COMPUTER/COMPONENT AUDIO IN terminal.

The names for the output setting of Digital RGB vary from equipment to equipment. For details, refer to the owner’s manual of your Digital RGB equipment.

When the black parts of the image are destroyed or stand out, please switch to Normal or Enhanced, and then switch the output type of the HDMI Digital RGB output equipment.

Terminal

The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output (p.9).

Computer 2…… Computer input

Monitor Out…… Monitor out

Terminal function is not available when Computer 2 is selected to the input source. Change the input source to the others (Computer 1, Video or HDMI) so that the Terminal function is available (pp.27-28, 37-38).

Ceiling

Rear

Note:

•When 4:3 or 16:9 is selected, True and Digital zoom +/- are not available in the PC screen (pp.35-36).

•When 4:3 or 16:9 is selected, Zoom, Natural wide and Wide are not available in the AV screen (p.43).

HDMI setup

50