Sanyo PLC-WL2503A owner manual Basic Operation Remote Control Operation, Fig..1 Note

Basic Operation

Remote Control Operation

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.

COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and COMPONENT buttons

Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and COMPONENT buttons on the remote control to select the input source. See pages 27-28, 37-38 for details.

Remote Control

COMPUTER 1/2 buttons

HDMI

VIDEO button

HDMI button

S-VIDEO button

COMPONENT button

FREEZE button

Press the FREEZE button on the remote control to freeze the picture on the screen, meanwhile, volume is muted.To cancel the Freeze function, press the FREEZE button again or press any other button.

Fig.1 will appear on the screen while the Freeze function is working.

Fig..1

Note:

When use the MUTE button to release the Freeze function, the mute function can not be operated at the same time.

INFO.. button

Display the input source information: Input, H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock and Remote control. (p.59)

	INFO..
FREEZE	button
button	LAMP
ASPECT
D..ZOOM	button
buttons	ASPECT
	button

Note:

See the next page for the description of other buttons.

D..ZOOM buttons

Press the D.ZOOM buttons on the remote control to enter to the D. zoom +/– mode. See page 36 for details.

LAMP button

Press the LAMP button on the remote control to select the lamp mode for changing the brightness on the screen.

Normal	.Normal brightness.
Eco	Lower brightness reduces the lamp power
	consumption and extends the lamp life.

ASPECT button

Select a screen aspect from 4:3, 16:9 and 16:10. (p.50)

Note:

When 4:3 or 16:9 is selected, some Screen modes are limited. See pages 35 and 43 for details.

25