Sanyo PLC-WL2503A Computer Input Input Source Selection Computer 2 RGB, Direct Operation, Note

Computer Input

Input Source Selection (Computer 2: RGB)

Direct Operation

Choose Computer 2 (RGB) by press the COMPUTER 2	Remote Control
		HDMI
button on the remote control or press the INPUT button on
the top control.

COMPUTER 2 button

Computer 2 (RGB)*

Top Control

INPUT button

Computer 1

Computer 2 *

HDMI

Video

*COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output.

		S-video
	Menu Operation		Input Menu
1	Press the MENU button to display the On-Screen
	Menu. Press the Point ▲▼ buttons, move the highlight
	to Input and then press the Point ► or the SELECT
	button.
2	Use the Point ▲▼ buttons to select Computer 2 and
	then press the SELECT button.
3	When Computer 2 is selected, analog RGB input
	source will be selected directly.

Note:

When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.45).

28