Sanyo PLC-WL2503A owner manual Appendix PIN Code Number Memo, Logo PIN Code Lock No

Appendix

PIN Code Number Memo

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service center.

PIN Code Lock No..

Factory default set No: 1 2 3 4*

Logo PIN Code Lock No..

Factory default set No: 4 3 2 1*

*Should the four-digit number be changed, the factory set number will be invalid.

While the projector is locked with the PIN code.

Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code.

Attatching the Cable Holder

Be sure to stick the adhesive cable holder (supplied) on the bottom of the projector and store the USB cable in the holder to prevent the cable from blocking communication between the infrared remote receiver and remote control (see the illustration).

Cable Holder (supplied)

Interactive Camera USB Cable (supplied)

Infrared Remote Receiver Remote Control Operating Range

76