4
To the Owner
Before operating this projector, read this manual
thoroughly and operate the projector properly.
This projector provides many convenient features and
functions. Operating the projector properly enables
you to manage thos e fea tures and m aintai ns it in
better condition for a considerable time.
Improper operation may result in not only shortening
the product-life, but also malfunctions, fire hazard, or
other accidents.
If y our pro jec tor se ems to op erat e i mpr oper ly,
read this manual again, check operations and
cable co nne cti ons and t ry the so luti ons in t he
"Troubleshooting" section on pages 56-57 of this
manual. If the problem still persists, contact the
dealer where you purchased the projector or the
service center.
CAUTION: TO RED UCE TH E R ISK OF ELE CTRI C
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RIS K OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN
NOTE: This symbol and recycle system are applied to EU
countries only and not applied to the countries in the
other area of the world.
Your SANYO product is designed
and manufactured with high quality
materials and components which
can be recycled and reused.
This symbol means that electrical
and electronic equipment, at their
end-of-life, should be disposed of
separately from your household
waste.
Please dispos e of this equi pment at your local
community waste collection/recycling centre. In
the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live
in!

Safety Precaution

WARNING: TO RE DU CE TH E R IS K OF FI RE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
– This proj ector pro duces inte nse light fro m th e
projection lens. Do not stare directly into the lens
as much as possible. Eye damage could result.
Be espec ially carefu l tha t chi ldren do no t sta re
directly into the beam.
– Install the projector in a proper position. If not, it
may result in a fire hazard.
– Allowing the proper amount of space on the
top, sides, and rear of the projector is critical for
proper air circulation and cooling of the unit. The
dimensions shown here indicate the minimum
space required. If the projector is to be built into a
compartment or similarly enclosed, these minimum
distances must be maintained.
– Do not cover the ventilation slot on the projector.
Heat build-up can reduce the service life of your
projector, and can also be dangerous.
– If the projector is not to be used for an extended
time, unplug the projector from the power outlet.
0.7'(20cm)
1.5'(50cm) 3'(1m) 1.5'(50cm)
SIDE and TOP REAR
Not for use in a comp uter room a s def ined in th e
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle
que définie dans la norme ANSI /NFPA 75 Stand ard
for Protection of Electronic Computer/Data Processing
Equipment.
READ AND KEEP THIS OWNER'S MANUAL FOR LATER
USE.
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the
ceiling, clean air intake vents, air filters,
or top of the projector periodically with
a vacuum cleaner. If you leave the
projector unclean for a long time, the
dust will block the operation of the
cooling function, and it may cause a
breakdown or a disaster.
DO NO T S ET THE PR OjE CTOR IN G REAS y, W ET,
OR SMOKy CONDITIONS SUCH AS IN A KITCHEN
TO PREVENT A BREAKDOWN OR A DISASTER. IF
THE PROjECTOR COMES IN CONTACT WITH OIL OR
CHEMICALS, IT MAy BECOME DETERIORATED.

CAUTION