Basic Operation
24
black out ➜ the captured image ➜ normal ➜ • • • • •
Press the NO SHOW button on the remote control to
black out the image. To restore to normal, press the
NO SHOW butto n agai n or press any other button.
When a projected image is captured and set as "User"
in the Logo selection (p.42), the screen changes each
time you press the NO SHOW button as follows.
NO SHOW button
Press the AUTO PC button on the remote control t o
operate the Auto PC function. For more detail, see
page 27.
AUTO PC button
Press the D.ZOOM buttons on the remote control to
zoom in and zoom out the images. For more detail,
see page 33.
D.ZOOM buttons
Press the P-TIMER button on the remote control. The
timer display "00 : 00" appears on the screen and the
timer starts to count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. Press
the P-TIM ER butt on agai n, then the P-timer display
disappears.
P-TIMER button
Press the IMAGE button on the remote control to select
a desired image level of the screen. For more detail,
see pages 30 and 37.
IMAGE button
For detail, see page 22.
KEySTONE button
LAMP CONTROL button
Press the LAMP CONTROL button on the remote
control to select the lamp mode for changing the
brightness of the screen.
Normal .. . normal brightness
Auto .. . . . bri ght nes s a cco rdi ng wit h t he in put
signal
Eco ...........lo wer b rig htn ess r edu ces t he la mp
power consumption and extends the
lamp life.
Remote Control
D.ZOOM buttons
NO SHOW button
AUTO PC button
✔ Note:
See t he prev ious pa ge for the
other buttons.
KEySTONE button
(See p.22)
POINT ed buttons
The message disappears after 4 seconds.
P-Timer display
LAMP CONTROL
button
P-TIMER button
IMAGE button
VOLUME +/- buttons
(See p.23.)