Video Input
39
To reset the adjusted data, select Reset and press
the SELEC T butto n. The con firmation box appears
and then select [Yes]. All adjustments returns to their
previous figures.
Reset
Press the Point 7 8 buttons to adjust the gamma value
to obtain better balance of contrast. (From 0 to 15.)
Gamma
Press the Point 7 button to soften the image and the
Point 8 button to sharpen the image. (From 0 to 15.)
Sharpness
To store the adjusted data, select Store and press the
SELECT button. Select a level from Image 1 to 4 with
the Point ed buttons and press the SELECT button. A
confirmation box appears and then select [Yes].
Stored data can be called up by selecting "Image" in
the Image Level Selection on page 37.
Store
Exit the Image Adjust Menu.
Quit
✔ Note:
Noise reduction and Progressive cannot be
selected when 480p, 575p, 720p, 1035i, or 1080i
is selected. (p.36)
Interlaced video signal can be displayed in a
progressive picture. Select one of the following.
Off . . . . disabled.
L1. . . . . Select "L1" for an active picture.
L2. . . . . Select "L2" for a still picture.
Film . . . Select "Film" for watching a film. With this
function, the projector reproduces pictures
faithful to the original film quality.
Progressive
Noise reduction
Noise interference on the screen can be reduced.
Select one of the following to get smoother images.
Off . . . . disabled.
L1. . . . . lower reduction
L2. . . . . higher reduction
Image Level Menu
Move the red framed pointer
to an image item to be set
and then press the SELECT
button.
Store item
The confirmation box
appears and then select
[Yes].
Video Input