rRECALL Key—Select the first channel you want to watch; then select another channel using the NUMBER keys. Press RECALL to switch easily between the channels.

Note: The RECALL key is inactive when an external input is selected (Video 1, Video 2, Video 3, or HDMI) and it cannot toggle between a Digital channel and an Analog channel. See TUNER key description.

tMENU Key—Press this key to display the on-screen menu.

yTUNER Key—Use this key to toggle from one tuning system to another, Digital channels and Analog channels.

Note: The TUNER key is inactive when an external input is selected (Video 1, Video 2, Video 3, or HDMI).

uCAPTION Key—Press to select analog or digital captioning. The Analog Caption modes are: CC1–CC4, Quikcap, and OFF. The Digital Caption modes are: Digital CC1–CC6, Quikcap, and OFF.

iChannel Scanning (CH ed) Keys—Press e (up) d (down) keys to tune to the next higher or lower channel in the Channel Scan Memory list. The scanning loop includes analog channels, and digital channels.

oPIX SHAPE Key—Use this key to change the video display format. Available options depend on signal received and the broadcast’s aspect ratio. They may include: PIX1, PIX2, PIX3, and PIX4. See simulated TV images below:

!2SLEEP Key—Press this key, then press the “0” key to set the Sleep Timer. The desired time can be set from 30 minutes up to 3 hours in 30 minutes increments.

To display the remaining time, press this key again. Sleep Timer will switch off the LCD Projection TV automatically.

Note: The Sleep Timer cancels when the LCD Projection TV is turned off or if a power failure occurs.

!3MUTE Key—Press once to minimize the volume. Press again to restore.

Note: This key will not mute the sound from the audio out jacks.

!4ENTER Key—Press this key to select an option from the menu system, when required.

!5Cursor e (up) d (down) Keys—Press these keys to move the cursor up and down within the menu. Cursor < (left) > (right) Keys—Press these keys to move the cursor left and right within the menu.

!6EXIT Key—Press this key to exit from the menu system.

!7Volume (VOL – +) Keys—Press the – + keys to adjust volume. The screen displays a left or right red arrow that blinks as many times as you press the VOL – + keys.

!8RESET Key—Press twice to restore factory settings. The LCD Projection TV will automatically start Channel Search and clear all customized settings (except for the lamp counter).

Note: The Reset Function includes a channel search. Current Digital and Analog channel databases will be deleted and new ones created by the Channel Search process. To receive Digital Cable channels, see page 21 for Digital Cable Search.

These features will reset to the factory defaults:

PIX1

Gray colored borders appear at the sides, of the screen.

Note: 4:3 image without distortion on a 16:9 screen.

PIX3

Enlarges a PIX2 image vertically (some of the image may be cropped off).

PIX2

A 16:9 image fills the screen normally. A 4:3 image is stretched horizontally and may appear distorted.

PIX4

Stretches the PIX3 image horizontally (portions of the sides and/or top and bottom may be cropped off).

•Picture Adjustments: Color, Tint, Contrast, Brightness, Sharpness, and AI

•Sound Adjustments: Treble, Bass, SRS Surround, FOCUS, TruBass or Woofer Level, and Woofer

•Channel Memory—Digital/Analog channel databases will be replaced

•Analog Audio to Stereo

•Captioning to OFF

•V-Guide to OFF

•Menu Language to English

•Sleep Timer to OFF (if previously set)

•Any Video mode to TV mode

•Lamp mode to “Mid” mode

If desired, personal settings can be made again using the menu options.

!0AUDIO Key—Press to select the desired audio mode (if available): DIGITAL: Main, Sub1, Sub2, Sub3, etc.; ANALOG: Stereo, Mono, SAP.

!1POWER Key—Press to turn the LCD Projection TV on or off.

19