USING THE ANALOG VIDEO1 JACKS TO CONNECT A VCR (OR OTHER ANALOG DEVICE)
Switch off the LCD Projection TV and external equipment before connecting cable. (Cable is not supplied.)
1 | Connect VCR’s Audio Video Out to the LCD |
| Projection TV’s VIDEO1 jacks. |
Note: For Mono VCR (Single Audio Jack), connect VCR Audio Out to LCD Projection TV’s
PTV BACK
2 | Optional: | ||
| Connect VCR’s | ||
| TV's | ||
| Note: | ||
| jack connection. | ||
3 | Press POWER to turn on the LCD Projection TV, | ||
| then turn on external equipment. | ||
4 | Press INPUT to select Video 1 to |
|
|
| |||
| view the VCR program. |
|
|
VIDEO |
| |
2 |
| |
VIDEO | ||
| ||
VIDEO |
| |
1 |
|
CABLE
2
1 | AUDIO |
VIDEO | |
VCR BACK | CABLE |
|
Note: Don’t be fooled by the phrase “Available in High- Definition.” Composite jacks offer only 480i (SDTV) resolution. To view available
■Press the INPUT key after connecting cables to access the VIDEO1 input. There is NO need to tune to a blank channel.
■“No Signal” will appear on the screen when no signal is detected.
REMOTE CONTROL
INPUT
POWER
1 2 3
4 4 5 6 3
What you will need for connections:
Audio Video Cable – 1
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must run All Channel Search twice before you can select the AV inputs.
16