2 INSTALL BATTERIES

• Install two “AAA” Batteries (not included) so that the “+” and “–” marks on the batteries match the “+” and “–” marks inside the remote control.

To review the remote control function, go to pages 18–19.

Note: Use two “AAA” alkaline batteries.

IMPORTANT: Spent or discharged batteries must be recycled or disposed properly in compliance with all applicable laws. For detailed information, contact your local County Solid Waste Authority.

REMOTE CONTROL

3 CONNECT AC POWER CORD

•Connect the AC Power Cord (supplied) to the LCD Projection TV and electrical outlet.

This LCD projection TV uses nominal input voltages of 120 V AC. It is designed to work with single-phase power systems having a grounded neutral conductor.

To reduce the risk of electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or Sanyo Fisher customer service.

Connect the LCD Projection TV with all peripheral equipment before turning it on. (See pages 12–17 for connection.)

CAUTION

For safety, unplug the AC power cord when the LCD Projection TV is not in use.

While this LCD Projection TV is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.

THE AC OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY ACCESSIBLE.

To POWER CORD

CONNECTOR on back of

LCD Projection TV.

AC Power Cord

To 120 V AC Outlet.

8