CONNECTING STB WITH DVI OUTPUT TO HDMI INPUT

Switch off the LCD Projection TV and external equipment before connecting cable. (Cable is not supplied.)

1

Connect the STB’s DVI Output to a “DVI to HDMI

 

Cable;” then connect the cable to the LCD

 

Projection TV’s HDMI input.

 

Note: Check with your local electronics store for a

 

DVI to HDMI Cable that matches your equipment and

 

the LCD Projection TV.

2

Connect the STB’s Audio L / R to the LCD

 

Projection TV’s VIDEO3 Audio L / R.

3

The LCD Projection TV must be turned on first,

 

press POWER. Then turn on your external

 

equipment.

4

Press INPUT to select HDMI to view a digital

 

program.

SET-TOP BOX (Can be a Digital Satellite Receiver,

DVD PLAYER, or similar digital device.)

2

 

 

 

 

 

 

AUDIO

 

 

 

1

 

 

CABLE

 

 

 

 

 

 

 

 

DVI TO HDMI

 

 

 

 

 

CABLE

 

Y–––––Pb–––––Pr

R-AUDIO-L (MONO)

 

 

 

R-AUDIO-L

VIDEO

 

 

 

 

 

 

3

 

 

 

 

 

 

Y–––––Pb–––––Pr

R-AUDIO-L (MONO)

 

 

 

 

 

VIDEO

 

 

 

 

 

DIGITAL

2

 

 

 

 

 

 

 

 

HDMI

 

AUDIO

 

 

 

 

 

 

 

S-VIDEO

R-AUDIO-L (MONO)

 

 

 

AUDIO

 

VIDEO

 

 

 

 

 

 

 

 

OUTPUT

 

 

 

REMOTE CONTROL

 

PTV BACK

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

POWER

 

 

 

 

1

2

3

 

 

 

4

4

5

6

What you will need for connections:

 

3

 

DVI to HDMI Cable – 1

 

 

 

 

Audio Cable – 1

 

 

 

 

 

 

 

IMPORTANT NOTE FOR MONITOR USE:

If you did not connect an antenna, you must run All Channel Search twice before you can select the AV inputs.

CONNECTING DIGITAL AUDIO OUT TO A MULTI-CHANNEL RECEIVER

Dolby® Digital Audio provides 5.1 channels of surround sound (five full-range channels [5] and one low- frequency effect channel [.1]). A fiber optics cable is used to carry the 5.1 surround sound (for low-noise signal transfer).

1

Using a Fiber Optics cable, connect the LCD

 

Projection TV’s Digital Audio Output to the Digital

 

Audio Input of a Multi-Channel Receiver. (Fiber

 

optics cable is not supplied.)

2

Press POWER to turn on the LCD Projection TV,

 

then turn on external equipment.

Notes:

When making the connection, do not pinch or kink the fiber optics cable.

Red light visible at the Digital Audio Output does not necessarily indicate that Dolby® Digital 5.1 audio is available. Digital audio is made up of light pulses that the human eye cannot detect. Dolby® Digital 5.1 audio is available at the Digital Audio Output only when received as part of a Digital signal.

MULTI-CHANNEL

1 RECEIVER

OPTICAL

DIGITAL CABLE

PTV BACK

REMOTE CONTROL

INPUT

POWER

 

1

2

 

 

4

5

6

What you will need for connections:

2

 

 

OPTICAL Cable – 1

 

 

 

IMPORTANT NOTE FOR MONITOR USE:

If you did not connect an antenna, you must run All Channel Search twice before you can select the AV inputs.

■Press the INPUT key after connecting cables to access the AV Inputs. There is NO need to tune to a blank channel.

■With a DVI connection, make sure you connect Audio out to the LCD Projection TV’s VIDEO3 Audio in.

■Because the VIDEO3 audio jacks are used to receive the audio from the DVI device, these video jacks cannot be used when a DVI device is connected.

■“No Signal” will appear on the screen when no signal is detected.

14