24

Input Source and System Selection

Press the INPUT button on the top control or the INPUT buttons on
the remote control (see below) to choose an input source.
Top Control
INPUT button
Press the VIDEO, S-VIDEO, C1, C2, H1, H2, or PC buttons on the
remote control according to the input source.
Remote Control

INPUT buttons on the remote control

INPUT buttons
When the video signal is connected to the VIDEO
jack, press VIDEO.
VIDEO
When the video signal is connected to the S-VIDEO
jack, press S-VIDEO.
S-VIDEO
When the video signal is connected to the
COMPONENT 1 jack, press C1.
C1
When the video signal is connected to the HDMI 1
terminal, press H1.
H1
INPUT button
Video
S-video
PC When the computer signal is connected to the
COMPUTER connector, press PC.
Component 1
Component 2
HDMI 1
HDMI 2
Note:
• Beforeselecting aninput sourcewiththese buttons,eachinput
mustbe set on a proper signal form via menu operation (see on
pages25 – 26).
Computer
Note:
• Whenswitching fromHDMI1 toHDMI2 orvice versa,thesignal
maybe interrupted for a moment depending on the equipment.
Input
When the video signal is connected to the
COMPONENT 2 jack, press C2.
C2
When the video signal is connected to the HDMI 2
terminal, press H2.
H2
http://www.pureglare.com.au