18
Connect the projector’s AC power cord into an AC outlet and
turn the Main On/Off switch on. The POWER indicator lights
red.
Press the POWER ON/STAND-BY button on the top control or
on the remote control.
The POWER indicator turns green and the cooling fans start to
operate. As the automatic slide shutter opens, a preparation
display appears on the screen and the countdown starts.
2
3
1
4After the countdown, the input source that was selected the
last time appears on the screen.

TurningOn the Projector

Complete peripheral connections (with a computer, VCR,
etc.) before turning on the projector.
Selected Input Source
OFF ON
Main On/Off switch
Note:
• Ifthe automaticslide shutterdoes notopen properly,the projector
willnot be turned on and the POWER indicator will blink orange.
Pressthe POWER ON/STAND-BY button again to restart.
• When“Countdown off”or“Off” isselectedin theDisplay function,
thecountdown will not be displayed on the screen (p.40).
• Duringthe countdownperiod, alloperationsare invalid.
• Imagemay lookdark forawhile afterturning onthe projector.
Lampneeds some time to stabilize after the power is turned on.
Storedlamp mode and the image mode will be active after the
lampis stabilized.
Top Control Remote Control
POWER indicator POWER
ON/STAND-BY
button
Automatic Slide Shutter
Do not touch the slide shutter while it is
moving, as this could cause injury or the
projector to malfunction.
Use this tab when handling manually.
Basic Operation
http://www.pureglare.com.au