29
Press the Point button to decrease the sharpness of the image;
press the Point button to increase the sharpness of the image
(from -7 to +7).
Sharpness
Lamp control
Use the Point buttons to adjust the gamma value to obtain a
better balance of contrast (from -7 to +7).
Gamma
An interlaced video signal can be displayed in progressive. Use the
Point buttons to select the desired options.
Off ..... Disabled.
Mode1 . . For moving pictures.
Mode2 . . For still pictures.
Film .... For watching a film. With this function, the projector
reproduces pictures faithful to the original film quality;
it operates on 3-2 and 2-2 pulldown video sources.
Progressive
This function allows you to change the brightness of the screen.
Use the Point buttons to select the desired lamp mode. You
can also select the lamp mode by pressing the LAMP CONTROL
button on the remote control.
Normal..... Normal brightness.
Auto 1 ..... The brightness according to the input signal.
Auto 2 ..... Less bright and lower-sound than Auto 1.
Eco........ Lower brightness reduces the lamp power
consumption.
The lamp mode is automatically switched to “Eco” under no signal
input.
Noise reduction
Press the Point button to lighten red tone; press the Point
button to deepen red tone (from -31 to +31).
White balance (Red)
Press the Point button to lighten green tone; press the Point
button to deepen green tone (from -31 to +31).
White balance (Green)
Press the Point button to lighten blue tone; press the Point
button to deepen blue tone (from -31 to +31).
White balance (Blue)
Note:
• If any oneofthe Whitebalance(Red, Green,or Blue)are adjusted,
theColor temp. level changes to “User.”
• Progressive cannotbeselected withthe computerinput andwhen
thevideo signal format is 480p, 575p, 720p, or 1080p.
Press the Point or OK
buttons to display the
Advanced menu.
Go on to the next page....
Image Adjustment
Noise interference on the screen can be reduced. Press the Point
buttons to change the noise reduction mode.
Off ....Noise reduction mode is “Off”
On .... Noise reduction mode is “On”
Use the Point buttons
to adjust the setting
values and press the OK
button.
If you press the Point
button, the next item can
be selected.
The selected item.
Press the Point or OK
buttons to access the
selected item. The adjust-
ment bar is displayed.
http://www.pureglare.com.au