25
System Menu (Video/S-Video)
If the projector cannot reproduce a proper video image, select
a specific broadcast signal format from among PAL, SECAM,
NTSC, NTSC 4.43, PAL-M, and PAL-N.

Video or S-Video

Component 1 or Component 2

The projector automatically detects the incoming video system
and adjusts itself to optimize its performance.
When the video system is PAL-M or PAL-N, select the system
manually.
Use the Point ! buttons to select the Input Menu and
press the Point or OK buttons to access the submenu
items.
Use the Point ! buttons to select an input source and
press the Point or OK buttons. The selected item is check
marked.
1
2
When the video signal is connected to the VIDEO or S-VIDEO
jacks, select Video or S-video respectively.
Menu Operation Input Menu
When the video signal is connected to the Y-Pb/Cb-Pr/Cr jacks,
select Component 1 or Component 2.
The projector automatically detects the incoming video signal and
adjusts itself to optimize its performance.
3When “Video” or “S-video” is selected, press the Point
button to display the System Menu.
4Use the Point ! buttons to select the desired system and
press the OK or Point buttons.
Video
Input
Auto
The currently set item
is check marked.
Press the Point button
to display the System
Menu.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
5When “Computer” is selected, press the Point button to
display the Source Select Menu.
6Use the Point ! buttons to select the desired source and
press the OK or Point buttons.
Use the Point ! buttons
to select the desired
system and press the OK
or Point buttons.
Quit
Exit this menu.

Input

http://www.pureglare.com.au