English
23
HD DATA WIRELESS TRANSMITTER BOX
OWNER'S MANUAL
Single Mode Operation
Mode select
1. Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to
move the red frame pointer to the HD DATA WIRELESS icon.
2. Use the Point de buttons to move the
red frame pointer to the Mode Select
icon and then press the SELECT button
twice. A dialog box appears.
3. Use the Point de buttons to select
Single mode and then press the SELECT
button.
Authentication
1. Use the Point de buttons to move the red frame pointer to the Authentication icon
and then press the SELECT button. A dialog box appears.
2. Use the Point de buttons to select
Execute and then press the SELECT
button. The receiver starts to establish
communication with the transmitter.
The message "Please wait ..." will be
displayed until the establishment.
3. Set up the authentication of the
transmitter.
4. If the authentication is completed, the
Success icon will be displayed for 4
seconds.
If it is not completed within about
5 minutes, the Failure icon will be
displayed for 4 seconds. Please check
the settings of the transmitter or the
receiver.
5. When the communication is established,
the LINK indicator lights orange.
Mode Select Menu
PROJECTOR
Success icon Failure icon
Authentication Menu
✐ If you press any button on the projector or the remote control during authentication, the
authentication will be cancelled.