Configure the network of computer

Windows XP

This example explains how to set the following network address.

IP Address

: 192.168.0.5

Subnet Mask

: 255.255.255.0

Gateway Address

: 192.168.0.1

1 Select the Control Panel menu from the [Start] menu. Click the Network and Internet Connection and then click the Network on the control panel.

2 Click the Local Area Connection icon with right button of the mouse and then select the Property menu. The right window will appear on the screen.

3 Select the General tab on the "Local Area Connection Properties" dialog window. Select the Internet Protocol(TCP/IP)*1 and then press the Properties button.

4 On the "Internet Protocol (TCP/IP) Properties" dia- log window, select the Use the following IP address button and then enter the IP address*2 and Subnet mask.

5Enter the Default gateway address.

This setting is not needed if the network does not pro- vide the gateway (router).

6 Click the OK button, the setting window will be closed.

*1 Select the "TCP/IP" item of the LAN card you use. If the "TCP/IP" item is not listed in the column, you need to install the TCP/IP protocol. For further information refer to the user's manual of your computer.

*2 If the network already has the TCP/IP protocol set, enter with the same IP network number for the IP address and Subnet mask.

*3 There are some ways to set up the network depending on your computer's appearances.

18

Page 18
Image 18
Sanyo POA-LN01 appendix Windows XP