Name and function of each part
Name and function of each part
Power indicator
This illuminates red when the Network function is set ON in the projector menu.
LAN port
Connecting the LAN cable. (p.13)
Serial port
This is used when controlling the external equipment via the network. (p.57)
Connector plug
Connect to the DVI terminal on the projector. (p.12)
SW lever
Presses the detection SW on the rear panel of the projector when this unit is mounted.(p.12)
Computer Input
Terminal
Use as the Computer 2 RGB analog input terminal. (p.12)
LINK indicator (Orange)
This illuminates orange when the Network Unit is connected to the network correctly.
ACT indicator (Green)
This turns on and off when sending or receiving of data
ENGLISH
!Caution
✐Do not touch the connector. It may damage the product.
Network Unit 11
OWNER’S MANUAL