Serial port setting

Setting to control the equipment connected to the serial port from the computer

Serial Control :Selects “External”

Port:Sets according to the computer specified port no. Do not use port no. 10000*2.

Other Settings :Sets according to the communication condition of the equipment

Setting to control the projector from the serial controller connected to the serial port

Serial Control :Selects “Projector”

Port:Not specified. Do not use port no. 10000*2.

Other Settings :Sets according to the communication condition of

the serial controller

Setting to control the projector from the computer through the LAN port

Serial Control

:Not specified

Port

:Not specified

Other Settings

:Not specified

* The port no. of the computer must be used with 10000.

*1 This product will restart automatically when the “Port” or “Serial Control” is changed and it takes about 40 seconds.

*2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is reserved to control the projector through the LAN port.

✐Exclusive driver software for control of the external equipment is required. This product does not provide any driver software. Please consult your local dealer.

✐There are 2 types of RS-232C serial cable, Normal and Reverse type. Usually, when connect- ing between this product and a projector or a computer, use Reverse type of serial cable. When connecting DVD player etc., use Normal type.

Network Unit

OWNER’S MANUAL

ENGLISH

59