Controlling the Projector

The setting items and their operations are listed below.

Setting items

Operation

Language

Select the language used in the on-screen menu of the projector. Select your

 

desired language with the pull down menu button, and then press the Set button.

Keystone

Correct the distortion of the projected image with the Left, Right, Up and

 

Down buttons. To cancel the keystone correction, press the OFF button.

Blue back

When this setting is ON, the projector displays a blue image when no input

 

signal is selected.

Display

This setting is to select whether to display the on-screen display menu.

Logo

When this setting is ON, the projector displays a logo when starting up.

Ceiling

When this setting is ON, the picture is reversed top/bottom and left/right.

Rear

When this setting is ON the picture is reversed left/right.

No Show

When this setting is ON the picture on the screen is black out.

Freeze

When this setting is ON, the picture on the screen is frozen.

Power Management

When this setting is ON, the projector will automatically turn the lamp off if the

 

input signal is interrupted and no control button is pressed for 5 minutes and

 

30 seconds. Set OFF to disable this function.

On Start

When this setting is ON, the projector is automatically turned on just by con-

 

necting the AC power cord to a wall outlet.

Timer Setting

Turns the projector on or off at a preselected day/date and time. Please see

 

chapter [Timer Setting] on the next page for more information.

Remote Control

8 different remote control codes can be set. Must be set the same code num-

 

ber with the remote control when this code is changed.

Lamp Counter Reset

This is used to reset the lamp-use time. When replacing the lamp, reset the

 

lamp-use time by pressing the Yes button. Another popup window*1 will

 

appear for confirmation and then press the Yes button to reset.

Lamp Mode*

This is used to switch the lamp mode. When Eco is selected, the projector

 

reduces the brightness and sets into the low power consumption mode.

 

* Some projectors may not have this menu.

P-TIMER

When P-TIMERbutton is pressed, the timer display "00:00" appears on the

 

screen and timer starts to count the time (00:00 ~ 59:59). To stop the time

 

counting, press P-TIMERbutton and press this button again to cancel the P-

 

TIMER function. The status is changed as ON -> STOP -> OFF when this but-

 

ton is pressed repeatedly.

 

 

[Note]

*1 This popup window is realized by using the JavaScript function of web browser. If the preference of the browser is set not to use the JavaScript, the lamp counter is reset immediately without displaying the popup window for confirmation. To display the confirmation window, please change your preference to use the JavaScript function.

There are various kind of ways to change this preference depending on the web browser's version and application. Please refer to chapter “Appendix: Web browser setting/Active Script (JavaScript enable)” on page 68.

44