Control multi- projectors at the same time

Status

If some of the registered projectors are deactivated by some means (such as disconnecting the power source, disconnecting the LAN cable, disconnecting from the net- work), control changes will continue to be effective for the projectors that are still activated. At the same time, the deactivated projectors are excluded from the multi- control, and they will be displayed with gray background color as shown below. The status of the registered projectors are indicated in the "Status" column. See the table below for status indications.

Status

Description

(none)

Connected correctly

no connected

It is not connected to the network. Please check

 

the connection and network configuration of this

 

projector.

password error

The login password is incorrect. The password for

 

the multi-controlled projectors must be the same.

 

Change password of this projector to the common

 

password.

 

 

✐If the multi-controlled projector is in the standby mode, any change is not effective except timer setting.

✐It is recommended that a specified projector should be chosen for setting when you use this multi-control function. The control for the multi-controlled projectors will become too compli- cated operation if this function is used for each projector.

✐If the registered projector is not connected to the network, it will take some time to complete the multi-control operation because of waiting for the response from each registered projec- tor.

Network Unit

OWNER’S MANUAL

ENGLISH

55