Installation
Flow of installation
The following are instructions for attaching this product to the projector and connecting it to the network. Please review the entire procedure to become familiar with it.
1Check package (p.11)
Please check the contents of a package. This product contains a Network Unit and an owner’s manual (this manual). Also please check the name and function of each part.
2Installation (p.12-14)
1.Mount this product onto the projector.
2.Connect the LAN cable and join it to the network.
3.Confirm that the network menus are activated on the setting menu of the projector.
3Network configuration (p.15-24)
Configure the network of the projector. Separate configurations must be set up for each network to which the projector will be connected.
☛Configure the network with the projector.
☛Configure the network with the computer.
Setting up is completed.
The preparation is completed to control the projector connected to the network. At next step, set up and control the projector via the network by using the web browser installed on your computer. Please see chapter “2: Basic setting and operation” on page 25.
10