Basic Setting and Operation

When the internal power circuit is failed:

TITLE: Message from projector 01-01-2003 00:59

Projector Model Name: XT10A/XT15A

TCP/IP: 192.168.0.2 Projector Name: myProjector

It sends you following massage.

*The Projector lamp was turned off, because projector power circuit failed. Unplug the projector from AC outlet and ask servicing to qualified service personnel.

The Projector lamp was turned off, because the projector power circuit failed.

Unplug the projector from AC outlet and ask servicing to a qualified service personnel.

When the life span of lamp is reached:

TITLE: Message from projector 01-01-2003 00:59

Projector Model Name: XT10A/XT15A

TCP/IP: 192.168.0.2 Projector Name: myProjector

It sends you following massage.

*The life span of lamp is reached.

Replace it with a new lamp immediately and reset the lamp counter. If the projector is used without reset the lamp counter, the alert mail is sent to users in every power- on of the projector. This alert mail will not be sent when unchecking the mail sending condition "When the life span of lamp is reached".

When the lamp use time reaches preselect lamp use time:

TITLE: Message from projector 01-01-2003 00:59

Projector Model Name: XT10A/XT15A

TCP/IP: 192.168.0.2 Projector Name: myProjector

It sends you following massage.

*The lamp use time reaches 800 hours. Prepare the lamp replacement.

The Network Unit sends a free message when the lamp use time reaches the prese- lected lamp use time. It can be used for preparation of the lamp replacement and the maintenance required.

34