Power on/off the projector

Check the status of projector

In the "Power & Status" page, you can control the projector power, and also you can check the status of the projector as follows:

Items

Description

Accumulated lamp-use time

It displays in 1 hour units (h)

 

When resetting the lamp counter, this time will be reset to 0.

Accumulated projector-use time

It displays the accumulated used time in an hour unit (h). This

 

cannot be reset.

Power status

It displays the status of the lamp, OFF, On starting up, ON, On

 

cooling down.

Projector condition

It displays the condition of the projector's power, Normal,

 

Power Failure, Temperature Error, Normal after temperature

 

over, On Power management working.

Input status

It displays the selected input mode, signal mode and signal

 

status.

Internal temperature

It displays the temperature at internal thermal sensors in

 

degrees. The icons [A], [B] and [C] on the page represent the

 

thermal sensors located in the projector. If the temperature at

 

one of those sensors exceeds specified temperature, the

 

appearance of its icon changes to the following alert icon to let

 

users know about the abnormal temperature. Please check

 

surrounding temperature of the projector, check for clogged air

 

filters and check area surrounding the ventilation fans.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The icons [A], [B] and [C] represent the sensors located in the projector as follows:

[A]: Surrounding temperature of the projector *

[B]: Surrounding temperature of the lamp

[C]: Surrounding temperature of the panels

*The indicated peripheral temperature of the projector is a little higher than actual surrounding temperature.

Network Unit

OWNER’S MANUAL

ENGLISH

37