Basic Setting and Operation
This chapter describes basic operations and settings for controlling the projector via a network using this product. It is required that computer and projector are connected to the network and the network address be properly configured.
Login or logout the setting page of the projector
1 Enter the IP address
Launch the web browser installed in your computer, enter the IP address into the "Address" on the browser and the press the “Enter” key.
Enter the IP address that you configured in chapter “Network Configuration” on page 15. The default IP address is [192.168.0.2].
2Login
The following login page appears on the browser. Type the password and press the Enter button. If you check the item “Save this password”, you will automatically login* without entering the password for the next login.
[Note]
When accessing projector at first time or setting the no password [0000], the
✐The function of "Save this password" uses the cookies function and JavaScript function of the web browser. If you cannot automatically login even if the "Save this password " is checked, check your browser preference and change setting to "Accept all cookies" and “JavaScript Enable” if required. Please see chapter “Appendix: Web browser setting/Cookies enable, Active Script (JavaScript enable)” on page 68 for further information.
26