Control the projector
Image Adjustment
This function is to adjust the projected picture image and set the image mode. For selection of image mode, select desired image mode among the "Standard", “Real”, "Cinema", "Image1", "Image2", Image3" and "Image4"
with the "Image Adjustment Mode" pull down button and then press the Set button. The setting items are switched automatically according to selected input mode, computer or video input. To adjust the controls, press the + or - buttons to increase or decrease the value, or enter the value directly onto the text area of the control and then press Set button. The adjustment items and operation are listed below. The value next to each control represent the current control value and status.
The mode "Image1" to "Image4" can be stored as your preferred image mode through "Save Adjustment" item located on lower part of the page. Select an image number from the pull down menu button and then press the Save button. To cancel your change, press the Return button.
The "Original Mode" is to indicate which image mode are applied to the user preset modes "Image1" to "Image4".
| Adjustment items | Operation | |
| Image adjustment mode | Select image mode among the Standard, Real **, Cinema*, Image1 | |
|
| to Image4 with pull down button menu . Image1 to 4 are user preset | |
|
| mode. | |
| Adjustment items | Contrast, Brightness, Sharpness*, Gamma, White Balance, Color Temperature, | |
|
| Tint*, Color*, Noise Reduction*, Progressive* | |
|
| * Controls for video input, ** Controls for computer input | |
| Comment | Type the comment in the text area and press the Save button. | |
|
|
|
|
|
|
|
|
✐Range of control value is as follows: Sharpness: 0 to 31, Gamma: 0 to 15, others: 0 to 63
Network Unit
OWNER’S MANUAL
ENGLISH
41