Sanyo SCP-200 manual Sending aTextMessage, Tosendatextmessage

Sending aTextMessage

With Messaging, you can use a person’s wireless phone number to send and receive text messages from your Sprint PCS Phone to their messaging-ready phone – and they can send messages to you.

Tosendatextmessage:

1.Press to access the main menu.

2.Select Messaging and press .

3.Select SendText and press .

4.To add recipients, select an option from the following and press .

■PhoneBookEntry to select a recipient from your Contacts list. Highlight an entry and press to select. Or select

<AddEntry> to enter a new entry. Press Done (left softkey) when you are finished selecting/entering recipients.

■MobilePhone# to enter a mobile phone number directly.

■EmailAddress to enter an email address directly.

■FromRecentList to select recipients from a list of recent message recipients.

Tip: If you have unsentmessages in Outbox, you will be notified to send the message during step 4 above. Press OK (leftsoftkey) to go to Outbox. Press Cancel (rightsoftkey) to create a new message.

5.To edit your recipients, highlight a recipient, press Options (right softkey), highlight an option, and press .

■Edit to edit the selected entry.

■Erase to erase the selected entry.

■EraseAll to erase all entries you have selected and entered.

■AddRecipient to add recipients.

6.Press Next (left softkey) when you are finished selecting and entering recipients (you may include up to 10 recipients).

7.To enter a message, select Message and press .

8.Use your keypad to enter a text message (or press Mode [right softkey] to select from PresetMessages, RecentMessages, or Signature), and press OK (left softkey).

Tip:The Signature option appears only when you set your signature (see page 60).

Section 3A: Sprint PCS Service Features – The Basics 123