Using Speed Dialing

With this feature, you can dial your favorite entries using one key press for locations 2-9. (See “Assigning Speed Dial Numbers”on page 85.)

Tousespeeddialforvoicecalls:

From standby mode, press and hold the appropriate key for approximately two seconds.

– or –

From standby mode, press the appropriate key and

press or .

The display confirms that the number has been dialed when it shows “Connecting...”.

Note: Speed dialing may notbe available when you are roaming; when you are roaming off the Nationwide SprintPCS Network, you mustalways dial using eleven digits (1 + area code + number).

Using Abbreviated Dialing

Abbreviated Dialing is another form of speed dialing. It allows you to dial a number by entering the last 3-6 digits of any number in your Contacts directory. This feature becomes available when you enable Abbreviated Dialing and enter the appropriate digits of a phone number. See page 57 for the setting.

ToplaceacallusingAbbreviatedDialing:

1.Dial the last 3-6 digits of a contact’s phone number.

2.Press Options (right softkey) to display the dialing options.

3.Highlight Abbrev.Dial and press , , or .

Tip:You can also place a call by pressing or during step 2 above.

Note: If there is no matched number, your phone dials the number you setfor abbreviated dial with the lastfour or five digits you entered. If there are matched numbers in your Contacts list, the abbreviated dial listwill be displayed.To place a call,

selecta number and press .

Section 2A: Your Sprint PCS Phone – The Basics

31

Page 37
Image 37
Sanyo SCP-200 manual Using Speed Dialing, Using Abbreviated Dialing, Tousespeeddialforvoicecalls