Sanyo SCP-200 manual Answering Calls, Toansweranincomingcallwiththeflipopen

Answering Calls

Toansweranincomingcallwiththeflipopen:

1.Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.Press or to answer an incoming call. (Depending on your phone’s settings, you may also answer incoming calls by opening the phone or by pressing any number key. See “Setting Any Key Answer” on page 56 for more information.)

Tip: Press Ignore (leftsoftkey) when you do notwantto answer the call.

Toansweranincomingcallwiththeflipclosed:

▶Open the phone to use the earpiece.

Note: If the setting for Open Flip is setto “No Action,”opening the phone will not answer the call. (See “Setting the Open/Close Flip Option”on page 55.)

Your Sprint PCS Phone notifies you of incoming calls in the following ways:

⬤The phone rings and/or vibrates.

⬤The LED flashes.

⬤The backlight illuminates.

⬤The screen displays an incoming call message.

⬤If available, the phone number of the caller is displayed.

⬤If the phone number is in your Contacts list, the contact’s name is displayed.

The following options are also displayed by pressing Options (right softkey). To select an option, highlight it and press .

⬤CallGuard to answer the call when you are in roaming mode. See page 71 for setting Call Guard.

⬤Answer to answer the call.

⬤Answer:Speaker to answer the call in speakerphone mode.

⬤AnsweronHold to put the call on hold. (See “Setting Answer on Hold” on the next page.)

Section 2A: Your Sprint PCS Phone – The Basics 22