Sanyo SPW-XR254EH56 Before Installing the Ceiling Panel, Latch, Air filter 45 Safety string

■Ceiling Panel

CAUTION

Never touch or attempt to move the air direction louver by hand or you may damage the unit. Instead, use the remote control unit if you want to change the direction or air flow.

2-6. Before Installing the Ceiling Panel

(1)Remove the air-intake grille and air filter from the ceiling panel. (Figs. 2-13 and 2-14)

(a)Remove the 2 screws on the latch of the air- intake grille. (Fig. 2-13)

(b)Press on the 2 latches of the air-intake grille with your thumb in the direction of the arrow to open the grille. (Fig. 2-13)

(c)With the air-intake grille open about 45˚, remove the safety string (hook on the grille side). (Fig. 2-14)

(d)Pull the air-intake grille towards you to remove it from the ceiling panel.

(2)Pull down the two panel catches on the body of the indoor unit body. (Fig. 2-15)

Latch

Screw

Air intake grille

Ceiling panel

0149_X_I

Fig. 2-13

Air filter

45°

Safety string

0150_X_I

Fig. 2-14

9