NORMAL RECORDING
Setting the Mode at the End of the Tape
In the (SET UP 2) menu, you can set the mode of the VCR mode when the tape reaches the end during recording.
1Press the MENU button until the (SET UP 2) menu is displayed.
<SET UP 2> |
|
¤DISPLAY |
|
DATE | Y |
TIME | Y |
ALARM COUNT | Y |
¤TAPE IN MODE | STOP |
¤TAPE END MODE | REW |
¤TAPE END OUT | |
¤SERIES REC | N |
¤EJECT MODE | EJECT 1 |
¤THREAD CHECK | Y |
2Press the ] button, until the “TAPE END MODE” setting is flashing.
3Press the l (or j) button, to set the desired mode.
REW . . . . . . . . . . . . Rewinds the tape to the beginning, then goes to stop mode
STOP . . . . . . . . . . . . Goes to stop mode
4Press the PAUSE/SEARCH button to save the setting.
TAPE END Indicator Setting
1Press the MENU button until the (SET UP 2) menu is displayed.
<SET UP 2> |
|
¤DISPLAY |
|
DATE | Y |
TIME | Y |
ALARM COUNT | Y |
¤TAPE IN MODE | STOP |
¤TAPE END MODE | REW |
¤TAPE END OUT | |
¤SERIES REC | N |
¤EJECT MODE | EJECT 1 |
¤THREAD CHECK | Y |
2Press the ] button, until the “TAPE END OUT” setting is flashing.
3Press the l (or j) button, to select the desired output mode.
END . . . . . . . . . . . . . The TAPE END indicator flashes when the tape reaches the end.
4Press the PAUSE/SEARCH button, the normal screen is displayed.
NOTES:
•If “TAPE END MODE” has been set to “REW”, the TAPE END indicator will flash while the tape is rewinding.
•Press the EJECT, FF, REW or PLAY button to turn the indicator off.
13