SETTING THE CASSETTE EJECT MODE
Cassette Eject Setup
When using 2 VCRs or more, the cassette tape of all the VCRs or some of the VCRs can be ejected, if the EJECT terminals on the VCRs are connected as indicated.
1Press the MENU button until the (SET UP 2) menu is displayed.
<SET UP 2> |
|
¤DISPLAY |
|
DATE | Y |
TIME | Y |
ALARM COUNT | Y |
¤TAPE IN MODE | STOP |
¤TAPE END MODE | REW |
¤TAPE END OUT | |
¤SERIES REC | N |
¤EJECT MODE | EJECT 1 |
¤THREAD CHECK | Y |
EJECT terminal connection
VCR No. 1 | VCR No. 2 | |||
| EJECT |
| EJECT | |
COM OUT IN | COM OUT IN | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EJECT IN terminal
•Depending on the (SET UP 2) menu “EJECT MODE” setting (see “Cassette Eject Setup”), the cassette loaded in the VCR is ejected when there is an input at this terminal.
2Press the ] button, until the “EJECT MODE” setting is flashing.
3Press the l (or j) button to set the desired cassette eject mode.
EJECT1 . . . . . . . . . . The cassette is ejected only if the VCR is not in recording mode.
EJECT2 . . . . . . . . . . The cassette is ejected only if the VCR is in stop mode.
4Press the PAUSE/SEARCH button, the normal screen is displayed.
°The setting procedure is now completed.
EJECT OUT terminal
•When the EJECT button is pressed or when there is an input (trigger) at the EJECT IN terminal, a signal is output at this terminal, even if the security lock is set or if a cassette is not loaded.
19