TROUBLESHOOTING GUIDE
If the unit does not operate normally when you follow the instructions indicated in the manual, please refer to the table below.
SYMPTOM | POSSIBLE CAUSE | CORRECTIVE ACTION | |
|
|
| |
No power | The power cord is not connected | Connect the power cord | |
|
|
| |
No image displayed on | The connections are not correct | Check that all connections are correct | |
the monitor TV |
|
| |
The power to the camera and/or monitor TV | Turn all connected devices power on | ||
| |||
| is not turned on |
| |
|
|
| |
The buttons do not | A cassette tape is not loaded | Load a cassette | |
respond |
|
| |
All functions are suspended due to | Wait for the “À” indicator to go off | ||
| |||
| condensation |
| |
|
|
| |
| The security lock is engaged | Cancel the security lock | |
|
|
| |
Recording is not | The loaded cassette has no | Load a cassette tape with | |
possible (the tape is | |||
ejected) |
| with adhesive tape | |
|
|
| |
Noise in the playback | The video heads need cleaning | Clean the video heads | |
picture |
|
| |
|
|
| |
The date and time are | The ON SCREEN switch is set to the “OFF” | Set the ON SCREEN switch to the “ON” | |
not recorded | position | position | |
|
|
| |
The cassette tape | Problem with the system | Unplug the power cord then plug it back in | |
cannot be ejected |
|
| |
|
|
|
System Down
If the unit does not function at all, try the following.
1Unplug the power cord then plug it back in.
2Reset the memory. (Press the ALL RESET button. Under normal conditions, do not touch the ALL RESET button.)
3If the problem is not corrected after performing steps 1 and 2 a few times, consult your dealer.
22