PLAYBACK
Normal Playback
1Turn on the power to the VCR and TV monitor.
2Load the video cassette tape.
3Press the PLAY button.
°Playback starts.
°If necessary, adjust the tracking to eliminate the noise from the picture.
4To stop playback, press the STOP button.
°To advance or rewind the tape, press the FF or REW button.
NOTE:
•A tape recorded on other VCRs can be playback on this unit, however if a tape is recorded in SP mode with another VCR then its playback will be done in
Tracking Control
If there is noise in the image during playback,
1While looking at the playback picture, press and hold the TRACKING/V. STILL + button to minimize the noise.
2If it cannot be minimized, press the TRACKING/V. STILL – button.
Picture Search
1Press the FF (or REW) button, during normal playback.
°The image can be seen while the tape is advanced (or rewound) at high speed.
2To return to normal playback, press the PLAY button.
NOTES:
•During picture search, noise (horizontal bars) will appear in the picture.
•The sound is muted.
Still Image
1Press the PAUSE/SEARCH button, during normal playback.
°A still image can be viewed.
2To return to normal playback, press the PLAY button.
NOTES:
•If still mode continues for 5 minutes or more, the VCR will go into stop mode to avoid damaging the tape.
•If the image is unstable (rolling vertically), adjust the vertical lock control to correct.
Vertical Lock Control
During still image mode,
1Press and hold the TRACKING/V. STILL + button to reduce the vertical rolling of the image.
2If it cannot be corrected, press the TRACKING/V. STILL – button.
Frame Advance
1Press the FF button, during still image mode.
°The still image is advanced of one image (field).
2To return to normal playback, press the PLAY button.
16