Sanyo SRC-800 CONNECTIONS, NOTE:, NOTE:, About the memory reset, Power Cord Installation

CONNECTIONS

Connect the video camera and monitor TV as shown in the figure below.

NOTE: Before making the connections, make sure all the devices are disconnected from the power outlet.

Monitor TV (sold separately)

Video camera (sold separately)

From an external		To
		VIDEO IN
audio source
		jack
CLOCK SET	SERIES
OUT IN	COM OUT	IN
AC IN ~		AUDIO VIDEO
		IN
PUSH
OPEN		IN
REMOTE MIC IN		OUT
		OUT
Power cord		To
VIDEO OUT
	jack

Coaxial cable (sold separately)

To outlet

Power Cord Installation

1Plug the supplied power cord firmly into the AC power input AC IN socket.

2Insert the plug of this power cord into a outlet.

About the memory reset

If the VCR location is changed or to cancel previous settings, please reset the memory as described below.

The time and date will be reset.

To reset the memory, press the ALL RESET button.

NOTE:

•For more details, please refer to the manuals accompanying all other devices. If the connections are not made properly, it may cause a fire or damage the equipment.

7