Sanyo SRC-800 NOTES:, SERIES RECORDING, Loop recording connection, Continous Loop Recording Setup

SERIES RECORDINGContinous Loop Recording Setup

It is possible to configure at least two this VCR for continous loop recording.

Under loop recording when the recording finishes on the first unit, the new recording will start on the second unit. When the recording finishes on the second unit, recording will start on the first unit.

1The SERIES OUT terminal of VCR No.2 and the SERIES IN terminal No.1 should be connected (See diagram).

2Set the following items as indicated.

Item	VCR No.1	VCR No.2
		and on
Cassette tape	Loaded	Loaded
Operation mode	Stop	Stop
“TAPE END MODE” (in	REW	REW
(SET UP 2) menu)
“SERIES REC” (in (SET	Y (YES)	Y (YES)
UP 2) menu)
Security lock	Canceled	Set

3Press the REC button on VCR No.1.

°Recording will start in series recording mode.

4Set the security lock on VCR No.1.

Loop recording connection

Video camera

	To
VCR No.1	VIDEO IN
	jack

To COM

terminalTo

VIDEO OUT

To jack

SERIES OUT terminal

To

SERIES IN terminal

NOTES:

•The “TAPE END MODE” in (SET UP 2) menu should be set to "REW" for both units without fail.

•The TAPE END indicator will continue to bink when the end of the first tape is rearched.

•Under loop conditions, the tape will continue to re-record. If you need to keep the recorded infomation, please remove the tape after recording is complete and insert and new tape.

	Monitor TV
	To VIDEO IN jack
	To
VCR No.2	VIDEO IN
	jack

	To
To COM	VIDEO OUT
terminal	jack
To
SERIES OUT
terminal
	To
	SERIES IN
	terminal

15